User manual

2
2-70
E/OS Command Line Interface User Manual
config
Output The port binding configuration date is displayed as a table that
includes the following properties:
Output Example The output from the config.security.portBinding.show command
appears as follows.
Port Number: 4
WWN Binding: Active
Bound WWN: AA:99:23:23:08:14:88:C1
config.security.portBinding.wwn
Syntax wwn portNumber boundWwn
Purpose This command configures the single device WWN to which a port is
bound.
Parameters This command has two parameters:
Port Number The port number.
WWN Binding The state of port binding for the specified port: active
or inactive.
Bound WWN The WWN of the device bound to the specified port.
If this field is blank, no device has been bound to the
specified port.
portNumber Port number for which the bound WWN is being set.
Valid port number values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140