User manual

2
CLI Commands
2-69
config
Command Examples Root> config security portBinding bound 4 true
Root> config security portBinding bound 4 1
config.security.portBinding.show
Syntax show portNumber
Purpose This command shows port binding configuration for a single port.
Parameters This command has one parameter:
Command Example Root> config security portBinding show 4
portBindingState Specifies the port binding state as active or inactive.
Valid values are true and false.
true sets the port binding to active. The specified port
is bound to the WWN configured with the
config.security.portBinding.wwn command. If no
WWN has been configured, no devices can log in to
that port.
false sets the port binding to inactive. Any device is
free to connect to the specified port in this state,
regardless of the WWN setting.
Boolean 1 and 0 may be substituted as values.
portNumber Specifies the port number for which the port binding
configuration will be shown. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140