User manual

2
2-68
E/OS Command Line Interface User Manual
config
Output Example The output from the config.security.fabricBinding.showPending
command appears as follows.
Domain 1 (20:30:40:50:60:70:8F:1A) (Local)
Domain 3 (00:11:22:33:44:55:66:77) (Unattached)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF) (Attached)
Domain 14 (11:55:35:45:24:78:98:FA) (Attached)
config.security.portBinding
The Port Binding CLI commands enables users to bind a specific
switch or director port to the WWN of an attached node, switch, or
director for exclusive communication.
config.security.portBinding.bound
Syntax bound portNumber portBindingState
Purpose This command sets the port binding state for a given port.
Parameters This command has two parameters:
portNumber Specifies the port number for which the port binding
state is being set. Valid port number values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140