User manual

2
CLI Commands
2-67
config
Output This command displays the following fabric binding configuration
data:
Output Example The output from the config.security.fabricBinding.showActive command
appears as follows.
Domain 1 (20:30:40:50:60:70:8F:1A) (Local)
Domain 3 (00:11:22:33:44:55:66:77) (Unattached)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF) (Attached)
Domain 14 (11:55:35:45:24:78:98:FA) (Attached)
config.security.fabricBinding.showPending
Syntax showPending
Purpose This command displays the pending FBML, which may not reflect
what is active on the fabric.
Parameters This command has no parameters.
Command Example
Root> config security fabricBinding showPending
Output The fabric binding configuration data is displayed as a table that
includes the following properties of the Pending FBML.
Domain ID The domain ID of the FBML member. Valid domain
IDs range from 1 to 239.
WWN The World Wide Name (WWN) of the FBML
member in colon-delimited hexadecimal notation.
Attachment Status Indicates whether the FBML member is Local,
Attached, or Unattached. For more information, see
Fabric Binding Membership Terminology on page 2-62.
Domain ID The domain ID of the FBML member. Valid domain
IDs range from 1 to 239.
WWN The World Wide Name (WWN) of the FBML
member in colon-delimited hexadecimal notation.
Attachment Status Indicates whether the FBML member is Local,
Attached, or Unattached. For more information, see
Fabric Binding Membership Terminology on page 2-62.