User manual

2
2-66
E/OS Command Line Interface User Manual
config
Parameters This command has two parameters:
Command Examples
Root> config security fabricBinding deleteMember
AA:99:23:23:08:14:88:C1 2
config.security.fabricBinding.replacePending
Syntax replacePending
Purpose This command replaces the Pending FBML with the fabric binding
configuration that is currently loaded on the fabric.
Parameters This command has no parameters.
Command Example
Root> config security fabricBinding replacePending
config.security.fabricBinding.showActive
Syntax showActive
Purpose This command displays the fabric binding configuration (active
FBML) saved on the fabric. It performs the same function as
show.preferredPath.showState on page 2-236.
Parameters This command has no parameters.
Command Example
Root> config security fabricBinding showActive
wwn WWN of the member to be removed from the
Pending FBML. The value of the WWN must be in
colon-delimited hexadecimal notation (for example,
AA:00:AA:00:AA:00:AA:00).
domainId The domain ID of the member to be removed from
the Pending FBML. Valid domain IDs range from 1 to
239.