User manual

2
CLI Commands
2-65
config
config.security.fabricBinding.clearMemList
Syntax clearMemList
Purpose This command clears the Pending FBML in the working area.
Members that are attached remain in the list because the pending
FBML must contain all attached members to become active.
NOTE: This information is not saved to the fabric until the activatePending
command is issued. When the list is cleared, the CLI automatically adds the
managed switch to the Pending FBML.
Parameters This command has no parameters.
Command Example
Root> config security fabricBinding clearMemList
config.security.fabricbinding.deactivateFabBind
Syntax deactivateFabBind
Purpose This command deactivates the active FBML on the fabric. The Active
FBML is erased when this command is executed.
NOTE: This command takes effect immediately in the fabric.
Parameters This command has no parameters.
Command Example
Root> config security fabricbinding deactivateFabBind
config.security.fabricBinding.deleteMember
Syntax deleteMember wwn domainId
Purpose This command removes a member from the Pending FBML in the
fabric binding work area. The local member and attached members
cannot be deleted from the list.
NOTE: Changes are not activated to the fabric until the activatePending
command is issued.