User manual

2-64

E/OS Command Line Interface User Manual

config

config.security.fabricbinding.addAttachedMembers

Syntax addAttachedMembers

Purpose This command adds all the current members of the fabric to the

pending FBML. If the domain ID or WWN of a fabric member

already exists in the list, it is not added.

Parameters This command has no parameters.

Command Example

Root> config security fabricbinding addAttachedMembers

config.security.fabricBinding.addMember

Syntax addMember wwn domainId

Purpose This command adds a new member to the pending FBML in the

fabric binding work area, called the pending FBML. The number of

entries is limited to the maximum available domain IDs for the fabric,

which is 239.

NOTE: Changes from this command are not activated to the fabric until the

activatePending command is issued.

Parameters This command has two parameters:

Command Example

Root> config security fabricBinding addMember

AA:99:23:23:08:14:88:C1 2

wwn Specifies the world wide name (WWN) of the

member to be added to the Pending FBML. The value

of the WWN must be in colon-delimited hexadecimal

notation (for example, AA:00:AA:00:AA:00:AA:00).

domainId The domain ID of the member to be added to the

Pending FBML. Valid domain IDs range from 1 to

239.