User manual

2
2-58
E/OS Command Line Interface User Manual
config
Purpose This command deletes an entry from the local authentication
database. Both the Web and CLI interfaces must have at least one
valid username with an Administrator role.
Parameters This command has one parameter:
Command Example
Root> config security authentication user delete
01:2A:3f:4:5:0:0
config.security.authentication.user.modify
Syntax modify username interface1 [interface2]
Purpose This command modifies an existing user in the local authentication
database. The user password and the combination of interfaces can
be modified with this command. After executing this command,
users are prompted to enter a password, similar to behavior of the
user.add command.
The role of a user will remain the same unless the currently assigned
role is invalid for the new combination of interfaces. If the role is no
longer valid for an interface combination, the role will be changed
back to none. At least one username with an Administrator role must
exist in the user database at all times for both the web and CLI
interfaces.
NOTE: The SANtegrity Authentication feature key must be installed to
configure E_port and N_port usernames.
username A valid user name in the local authentication
database.