Specifications

72 Getting Started with the McDATA Intrepid FICON Director

Setting up a HyperTerminal session

For some special functions in the McDATA Intrepid FICON Director, it is required to set up a

HyperTerminal session. The communication is established via the Maintenance Connector on

the rear of the director and a COM port in the workstation PC.

1. Select

Start -> Programs -> Accessories -> HyperTerminal from your desktop (see

Figure A-1).

Figure A-1 HyperTerminal connection description

2. Enter a name (such as Intrepid) in the name field, select an icon and click OK. The

Connect To window appears (see Figure A-2).

Figure A-2 HyperTerminal Connect to panel

Select Icon

Intrepid