Specifications

Chapter 5. Configuring the FICON Director 67
6. On the next screen the name of the fabric and a list of the affected Directors is displayed.
Ensure you have chosen the correct fabric and Directors for zone set activation. Applying
the zoneset to an other fabric may impact the performance of these switches.
7. Click
Next and Start to continue the zoneset activation, and wait for message: Activate
zone set complete
, then close the window.
8. On the EFC Manager window click the
Zone Set tab.
The current active zone set and the zone members are listed in the window. An example of
an activated zone set is shown in Figure 5-29.
In this example Zoneset1 is the current active zone set. Zone1 and Zone2 are assigned to
Zoneset1 and the members of these zones are listed.
Because some of the devices are not defined in any of the zones, they are automatically
grouped into the default zone.
Figure 5-29 Current active zone set and zone members
Compare the listed devices with your configuration documentation (worksheet). If everything
is correct you can save these zone settings in a new zone set by clicking
Save Active Zone
Set as...
and entering a new name for the current zoneset. This zone set is added to the zone
library.
To save defined zones and zonesets go to the Zoning Library, select from the menu bar
File -
Export Zone Sets...
On the next panel select a subDirectory on the EFC Manager
workstation to store the export file, and enter a file name.
From the File menu in the Zoning Library there is also an Import Zone Set.. function available,
which allows you to import a zoneset file previously saved.