Specifications

Chapter 5. Configuring the FICON Director 65
Figure 5-26 Zonesets in zoning library
To verify that zones and zone members are correctly added to the zone set, click the zone set
and select
File - Properties from the menu bar. The complete zone set members and the
zone members are displayed, as shown in Figure 5-27.
Figure 5-27 Zoneset properties
Once all your zone definitions are correct, close the zone set properties window.
5.6.3 Activating a zone set
Several zone sets can exist in the zoning library and can be activated any time. There is one
zone which cannot be defined manually, that is the
default zone. All ports not being grouped
into the current active zone are automatically grouped into the default zone. If no zone set is
active, then all devices belong to the default zone.
Restriction: Up to 64 zone sets can be defined in the zoning library.