Specifications

64 Getting Started with the McDATA Intrepid FICON Director
64 zone sets can be defined in the zoning library and each zone set can group up to 1024
zones.
1. In the
Zoning Library window (see Figure 5-23) click the Zone Sets tab.
2. On the menu bar, click
File - New... to open the New Zone Set window.
All zones defined in the zoning library are listed in the left column. See Figure 5-25 for the
New Zone Set screen.
3. Type a name for the zone set. The name can have a maximum of 64 characters; then click
the
zone you want to add to the zone set.
4. Click the
Add button to add the zone into the right column.
Figure 5-25 Create a zoneset
To verify that the right zone is selected for adding to the zone set, click the zone, and then
click
View Members. This shows the members belonging to that specific zone.
5. Once all the zones grouped into the zone set are added to the right column, click the
OK
button to save this zone set.
6. Now you have a new zone set in the zoning library. See Figure 5-26 for a sample zone set
in the zoning library.