Specifications

62 Getting Started with the McDATA Intrepid FICON Director
5.6.1 Creating a zone
1. From the Fabrics view (as shown in Figure 5-22 on page 62), do the following:
Select Fabrics.
Select Zone Set.
Select Configure.
Select Zoning Library...
Figure 5-22 EFC Manager Zoneset display
Initially, the Zoning Library window (shown in Figure 5-23), will have no zone sets nor
zones listed.
Figure 5-23 Zoning Library
2. Click on the Zones tab, then on File - New to create a new Zone.
In the next window all Directors belonging to the selected fabric and their attached ports
are shown in the left-hand column. To select another fabric click the
Fabric pull-down
menu to choose another fabric.
Select Fabrics
Select Zone Set
Select Configure
Select Zoning Library...