Specifications

Chapter 5. Configuring the FICON Director 55
When Enterprise Fabric Mode is activated, a fabric membership list is automatically
created containing the Domain ID and WWN of both Directors.
9. Verify the membership list by selecting
Fabrics -> Fabric Binding -> Next ->
Membership
list. The list is shown in Figure 5-12.
Figure 5-12 Membership List containing Directors included in the fabric
10.After verifying the fabric settings, change to the Fabrics view, which will show the complete
fabric as seen in Figure 5-13. Right-click the
ISL to display details about ISL connection.
Note: If any Director that is not in the membership list is connected to this Director, the ISL
link will segment. An “invalid attachment” is reported on the isolated E_Port.