Specifications

50 Getting Started with the McDATA Intrepid FICON Director
Figure 5-6 Feature Key entry
The installed SANtegrity feature allows E_Port functionality when operating in S/390 mode,
which is required for a FICON cascaded topology.
5.3 Enabling the Control Unit Port (CUP)
If the Management Server or CUP feature, FC 6302 (Intrepid 6064) or FC 6003
(Intrepid 6140) has to be activated, these steps have to be performed:
1. Click the
Configuration tab on the Hardware view, then select Features .
2. The Configure Feature Key window is displayed which shows all installed features. If not
already in the list, click
New and enter the McDATA provided key for the FICON
Management Server.
Figure 5-7 shows the window with the installed and enabled features.