Specifications

© Copyright IBM Corp. 2003. All rights reserved. 45
Chapter 5. Configuring the FICON Director
This chapter provides information about how to configure the McDATA Intrepid FICON
Director in a switched point-to-point configuration or a cascaded FICON Director
configuration.
The following topics will be discussed in detail:
򐂰 Setting up a FICON Director
򐂰 Activating High Integrity Fabric feature
򐂰 Enabling the CUP feature
򐂰 Building a High Integrity fabric
򐂰 Port configuration
򐂰 Port WWN Device Names configuration
򐂰 Switch Binding
򐂰 Zoning
򐂰 Verifying the configuration
5
Note: All tasks described in this chapter require administrator authority. See 4.2.3,
Users on page 41 for an example.