Service manual

2
Installation Tasks
2-21
Installation Tasks
Figure 2-9 Basic Information View
Configure Port BB_Credit
Perform this procedure to configure port receive BB_Credit.
1. Set all or a subset of user-specified ports offline (Blocking and
Unblocking Ports on page 4-27).
2. Select Ports and RX BB_Credit from the Configure menu at any
view. The RX BB_Credit View displays.
3. Perform one of the following:
— To set all offline ports to default values, click Default.
— To setanofflineport toa user-specifiedvalue, typethe desired
value in the RX BB_Credit column.
4. Click OK to save and activate changes.
5. Set ports online (Blocking and Unblocking Ports on page 4-27 ).
Configure Port NPIV
NPIV allows multiple (up to 256) Fibre Channel addresses to be
assigned to a node (N_Port). The NPIV feature must be installed