Manualshelf

Service manual

ManualsBrandsMcDATA ManualsComputer equipmentIntrepid 6064 Director
61626364656667686970
2
2-20
Intrepid® 6064 Director Installation and Service Manual
Installation Tasks
e. Click close (X)atthe upperrightcorner of the DOSwindow to
close the window and return to the Windows desktop.
4. Perform a power-on reset (POR) (IML, IPL, or Reset the Director on
page 4-38).
5. At the PC, launch the browser application (Internet Explorer or
Netscape Navigator). Enter the director new IPaddressasthe
Internet URL. The Enter Network Password dialog box displays.
6. Type the case-sensitive user name and password and click OK.
The EFCM Basic Edition interface opens and the To polog y Vi ew
displays with status information about each fabric element.
Configure Basic Port Information
Perform this procedure to configure basic port information.
1. Select Ports and Basic Info from the Configure menu at any view.
The Basic Information View displays (Figure 2-9).
a. For each port to be configured, type a port name of 24
alphanumeric characters or less in the Name field. The port
name should characterize the device to which the port is
attached.
b. Click a check box in the Blocked column to block or unblock a
port (default is unblocked). A check mark in the box indicates
aportisblocked.
c. Click the check box in the FAN column to enableor disable the
fabric address notification (FAN) feature (default is enabled).
A check mark in the box indicates FAN is enabled. When the
feature is enabled, the port transmits FAN frames after loop
initialization to verify that FC-AL devices are still logged in.
d. Selectfromthe drop-down listin the Type column toconfigure
the port type. Available selections are fabric port (F_Port),
expansion port (E_Port), generic port (G_Port), generic mixed
port (GX_Port), and fabric mixed port (FX_Port).
e. Select from the drop-down list in the Speed column to
configure the port transmission rate. Available selections are
auto-negotiate between 1.0625 and 2.1250 gigabit per second
(Gbps) operation (Negotiate), 1.0625 Gbps operation (1
Gb/sec), and 2.1250 Gbps operation (2Gb/sec).
2. Click OK to save and activate changes.