Service manual

2
Installation Tasks
2-15
Installation Tasks
Figure 2-5 Date Time View
Configure Parameters
Perform this procedure to configure director operating parameters.
1. Set the director offline (SettingtheDirectorOnlineorOfflineon
page 4-36).
2. Select Switchand Parametersfromthe Configure menu at any view.
The Parameters View displays (Figure 2-6).
Figure 2-6 Parameters View
a. At the Insistent Domain ID field, check (enable) or uncheck the
parameter. Whenenabled,thevalueconfiguredin thePreferred
DomainID field becomes the active domain ID whenthe fabric
initializes.