Service manual

2
2-14
Intrepid® 6064 Director Installation and Service Manual
Installation Tasks
Figure 2-4 Identification View
Configure Date and Time
Perform this procedure to configure director date and time.
1. Select Switch and Date & Time from the Configure menu at any
view. The Date Time View displays (Figure 2-5).
a. Click Date fields that require change, and type numbers in the
following ranges:
•Month(MM): 1 through 12.
•Day(DD): 1 through 31.
•Year(YYYY): greater than 1980.
b. Click Time fields that require change, and type numbers in the
following ranges:
•Hour(HH): 0 through 23.
•Minute(MM): 0 through 59.
•Second(SS): 0 through 59.
2. Click OK to save and activate changes.