Service manual

2
Installation Tasks
2-13
Installation Tasks
• Ports - includes basic information, buffer-to-buffer credits
(BB_Credits), and N_Port identifier virtualization (NPIV).
• Management - includes SNMP trap message recipients,
command line interface (CLI), open systems management server
(OSMS), secure socket layer (SSL) encryption.
• Options - includes product feature enablement (PFE) keys.
• Security - includes SANtegrity authentication (settings, access
control list, and remote authentication dial-in user service
(RADIUS) server support), Enterprise Fabric Mode, and
SANtegrity binding (fabric, switch, and port binding).
• Interswitch links - includes OpenTrunking, preferred path, and
interswitch link (ISL) port fencing.
Configure Director Identification
Perform this procedure to configure the director identification. The
Name, Location,andContact variables correspond respectively to the
SNMP variablessysName,sysLocation,andsysContact,andareusedby
management workstations when obtaining director data.
1. Select Switch and Identification from the Configure menu at any
view. The Identification View displays (Figure 2-4).
a. Typea unique director name of 24 alphanumeric characters or
less in the Name field. If installed on a public LAN, the name
should reflect the director Ethernet network domain name
system (DNS) host name.
b. Type a director description of 255 alphanumeric characters or
less in the Description field.
c. Type the director physical location (255 alphanumeric
characters or less) in the Location field.
d. Typethenameofacontactperson(255alphanumeric
characters or less) in the Contact field.
2. Click OK to save and activate changes.