Service manual

A
CTP/CTP2 Card Events (400 through 499)
A-49
Event Code Tables
Event Code: 452
Message: Backup CTP incompatible with configured system settings.
Severity: Informational.
Explanation: This event occurs when the backup CTP is failed as a result of being incompatible with current system settings.
Normally this event will be generated following a hot-plug or power-on reset. (This event usually occurs when a
CTP is installed into a system operating at a director speed that is not supported by the CTP.) This event should
be followed by a 414 event.
Action: Replace the backup CTP with a version of hardware capable of supporting the user-configured settings, or adjust
theusersettingstobecompatiblewiththebackupCTPandreseatthebackupCTP.
Event Data: None.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Event Code: 453
Message: New feature key installed.
Severity: Informational.
Explanation: This event occurs when a new feature key is installed from the management server or Web server. The director
performs an IPL when the feature key is enabled. Event data indicates which feature or features are installed.
Action: No action required.
Event Data: Byte 0 = feature description as follows: 00 through 04 = Flexport, 06 = open-system management server,
07 = FICON management server.
Byte 1 = feature description as follows: 01 = full volatility, 02 = FICON CUP zoning, 03 = SANtegrity
authentication, 04 = CNT support, 05 = hardware trunking, 06 = SANtegrity binding, 07 = open trunking
Byte 2 = feature description: 02 = remote fabric license, 06 = Element Manager license, 07 = preferred path
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident