Service manual

3
3-12
Intrepid® 6064 Director Installation and Service Manual
Maintenance Analysis Procedures (MAPS)
— EFCM Basic Edition - Select Event from the Logs menu at
any view. The
Event Log displays.
— Element Manager - Select
Event Log from the Logs menu
at any view. The
Event Log displays.
b. Record the event code and associated date, time, and severity
(
Informational , Minor , Major ,or Severe ).
c. If multiple event codes are found, record all codes and severity
levels. Record the date, time, and sequence, and determine if all
codes are related to the reported problem. Begin fault isolation
with the most recent event code with the highest severity level.
Other codes may accompany this event code, or may indicate a
normal indication after a problem is recovered.
Were one or more event codes found?
NO YES
↓ Go to Table 3-3. Exit MAP.
Return to step 1 and perform fault isolation again. If this is the
second time at this step, perform a data collection and contact the
next level of support (
Collecting Maintenance Data on page 4-32).
Exit MAP.