System information

4
Configuring iSAN Connections
4-19
Configuring iFCP Connections
CAUTION
If you make zone changes using SANvergence Manager, do a
refresh (press F5 or click Refresh) to update the list of available
zones.
2. To edit existing remote connection information, select one or
more rows in the table and click Edit. This displays the Edit
Remote Connections dialog box (
Figure 4-8 on page 4-20).
Table 4-2 Remote Connections Parameters
Setting Description
Connection Description Enter up to 32 characters of description to help remember the
purpose of this connection.
Local SAN Router Port Select the port on the local SAN Router from the drop-down
list.
Remote SAN Router IP
Address
IP address of the SAN Router that is providing TCP access to
the remote SAN. Enter the remote SAN Routers WAN port
address.
Connection State Select Enabled from the drop-down list for normal sharing of
devices between SANs. Select Disabled to prevent sharing of
storage devices. While the connection is disabled, the
connection acts as if it were not present in the list at all.
Connection timeout The connection timeout is the maximum time that the remote
SAN Router can remain unreachable before the connection is
closed. The default is 10 seconds.
TCP Window Size The size for TCP connection on this link. Auto indicates the
window size is selected for each TCP connection depending
on the round-trip time measurements. Manual indicates any
other user-defined value entered in the text field next to the
Manual button.
Exported zones This table lists the zones exported over iFCP connections
through the SANvergence Manager.