System information

4
Configuring iSAN Connections
4-5
Configuring TCP Ports for iFCP
Figure 4-2 FC/Ethernet Port Configuration Dialog Box
2. Select a port. The screen is refreshed to show the operational
state.
3. Type a label for this port in the Port Name field.
4. Set the port speed under the Port Speed list, if needed and select
the Enable Port checkbox.
5. Select or clear the Autonegotiations check box as required. This
option determines whether the port advertises its autonegotiation
properties to a receiving device per the autonegotiation specified
by IEEE standard 802.3.