System information

3
3-10
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Configuring Advanced FC Port Parameters
Configuring Advanced FC Port Parameters
To configure FC port timeouts, follow these instructions:
1. Select Configuration>Port >Advanced FC Port to display the
Advanced FC Port Configuration dialog box.
Figure 3-3 Advanced FC Port Configuration Dialog Box
2. Select the Port number from the list. The current timeout values
are displayed and may not be changed.
• EDTOV - (Error detection timeout value in seconds). This is a
short timeout used to detect an error condition. The value
EDTOV represents a reasonable timeout value for detection of
a response to a timed event.
• RATOV (Resource allocation timeout value in seconds) - A
long timeout value used to determine when to reinstate a
recovery qualifier. The value RATOV represents EDTOV plus
twice the maximum time that a frame may be delayed within a
fabric and still be delivered.
3. Enter the timeout values you wish to be in effect after the next
system reset in the After next reset column.