System information
Table Of Contents
- Cover
- Preface
- Overview
- Configuring System Basics
- Configuring RADs and mSAN Connections
- Configuring iSAN Connections
- Configuring iSCSI Connections
- Monitoring SAN Router Operation and Connections
- Configuration, Firmware, and System Log Maintenance
- Troubleshooting
- Glossary
- Index
2
2-10
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Using the Element Manager
Figure 2-3 Management Port Configuration Dialog Box
2. Enter the IP address and subnet mask address for the
management port.
3. Click Edit Gateway to add the IP address of the gateway router to
the static route table if any of your management stations are on a
different subnet than the one you are specifying for the
management port.
4. Click OK or Apply.
5. Choose Save Configuration to Flash from the File tab to
permanently save the new routing information.