System information
Table Of Contents
- Cover
- Preface
- Overview
- Configuring System Basics
- Configuring RADs and mSAN Connections
- Configuring iSAN Connections
- Configuring iSCSI Connections
- Monitoring SAN Router Operation and Connections
- Configuration, Firmware, and System Log Maintenance
- Troubleshooting
- Glossary
- Index
7
7-10
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Factory Default Settings for the SAN Router
iSCSI parameters
Selective ACKnowledgement Disabled Configuration>Port>FC/Ethernet>Advanced
Large PDU Enabled Configuration>Port>FC/Ethernet>Advanced
Initial R2T Enabled Configuration>Port>FC/Ethernet>Advanced
Store and Forward Disabled Configuration>Port>FC/Ethernet>Advanced
Target Read Padding Disabled Configuration>Port>FC/Ethernet>Advanced
Target Write Padding Disabled Configuration>Port>FC/Ethernet>Advanced
Immediate Data Enabled Configuration>Port>FC/Ethernet>Advanced
NOP Packets Enabled Configuration>Port>FC/Ethernet>Advanced
Authentication method None Configuration>Port>FC/Ethernet>Advanced
Login Retry timeout (in seconds) Configure/60 Configuration>Port>FC/Ethernet>Advanced
First Burst Length (KB) 64 Configuration>Port>FC/Ethernet>Advanced
Max Burst Length (KB) 256 Configuration>Port>FC/Ethernet>Advanced
Max Rcv Data Segment Length (C\KB) 64 Configuration>Port>FC/Ethernet>Advanced
iFCP parameters
Compression Level None Configuration>Port>FC/Ethernet>Advanced
Compression Method LZO Configuration>Port>FC/Ethernet>Advanced
Selective ACKnowledgement Disabled Configuration>Port>FC/Ethernet>Advanced
FastWrite Disabled Configuration>Port>FC/Ethernet>Advanced
Transmit Buffer Management Disabled Configuration>Port>FC/Ethernet>Advanced
General Configuration
iSCSI
Enable Auto Initiator Accept Enabled Configuration>iSCSI>Devices
Primary RADIUS Server
Table 7-3 Default Element Manager Parameter Settings (Continued)
Parameter Default Setting Menu Path