System information
Table Of Contents
- Cover
- Preface
- Overview
- Configuring System Basics
- Configuring RADs and mSAN Connections
- Configuring iSAN Connections
- Configuring iSCSI Connections
- Monitoring SAN Router Operation and Connections
- Configuration, Firmware, and System Log Maintenance
- Troubleshooting
- Glossary
- Index
7
Configuration, Firmware, and System Log Maintenance
7-9
Factory Default Settings for the SAN Router
Multi-function port type Fibre Channel Configuration>Port>FC/Ethernet
Port Speed Auto Configuration>Port>FC/Ethernet
Port State Enabled Configuration>Port>FC/Ethernet
Port Parameters FC-Auto Configuration>Port>FC/Ethernet
Advanced
E_D_TOV - Error Detection (sec) 2 Configuration>Port>Advanced FC Port
R_A_TOV - Resource Allocation (sec) 10 Configuration>Port>Advanced FC Port
Intelligent TCP ports
Ethernet and IP Parameters
Protocol iFCP Configuration>Port>FC/Ethernet
Port Speed 1 Gigabit Configuration>Port>FC/Ethernet
Port State Enabled Configuration>Port>FC/Ethernet
Autonegotiations Enabled Configuration>Port>FC/Ethernet
iSCSI/iFCP port IP address 0.0.0.0 Configuration>Port>FC/Ethernet
iSCSI/iFCP port subnet mask 0.0.0.0 Configuration>Port>FC/Ethernet
iSCSI/iFCP port External router address 0.0.0.0 Configuration>Port>FC/Ethernet
iSCSI/iFCP port Internal SAN address 0.0.0.0 Configuration>Port>FC/Ethernet
TCP parameters
Auto Reset Port on Severe Errors Enabled Configuration>Port>FC/Ethernet>Advanced
Smaller CWND Reduction Disabled Configuration>Port>FC/Ethernet>Advanced
Quick Start Disabled Configuration>Port>FC/Ethernet>Advanced
Reduced Slow Start Timeout Disabled Configuration>Port>FC/Ethernet>Advanced
Disable Standard Congestion Avoidance Disabled Configuration>Port>FC/Ethernet>Advanced
Reorder Resistance Disabled Configuration>Port>FC/Ethernet>Advanced
MTU Size Auto Configuration>Port>FC/Ethernet>Advanced
Table 7-3 Default Element Manager Parameter Settings (Continued)
Parameter Default Setting Menu Path