System information

7
Configuration, Firmware, and System Log Maintenance
7-5
Upgrading bootrom (E/OSi)
Upgrading bootrom (E/OSi)
You can use the CLI or Element Manager to download and install
bootrom to the SAN Router. The following instructions are for using
the Element Manager.
1. To determine if the bootrom installed on your system requires an
upgrade:
•Select Configuration/System/Properties to display the System
Properties dialog box. Check the version number in the Boot
ROM version field.
• Compare the bootrom version number to the bootrom version
in
Table 7-1 for the E/OSi firmware installed on your SAN
Router.
2. If you need to upgrade the bootrom to match your current E/OSI
firmware, select File>Firmware Upgrade.
The Firmware Upgrade dialog box appears (Figure 7-1 on
page 7-2).
3. Enter or edit the TFTP server IP address where the bootrom.bin
file is stored.
4. Enter or edit the fully qualified path and file name on the TFTP
server for the new bootrom.bin file.
5. Click Download.
6. When the download completes, do not click Activate on the dialog
box. Instead, reset the SAN Router. This will activate the new
bootrom with the current version of E/OSi firmware installed on
the system.
To reset the SAN Router, select Reset System from the File menu.
When the Reset Options dialog box displays, select the first option
to Reset System.
Table 7-1 SAN Router E/OSi and bootrom Versions
E/OSi Version bootrom Version bootrom File Name
4.6 v1.0.3 ECP2k103bootrom.bin
4.7 v1.0.3 ECP2k103bootrom.bin