System information

7
Configuration, Firmware, and System Log Maintenance
7-3
Upgrading Firmware (E/OSi)
The dialog box shows the previous version, build date, the
active/inactive status of both firmware locations. The TFTP
server address and file name are blank the first time the dialog
box appears. If the dialog is displayed again later, the last
contents are displayed.
2. Enter or edit the TFTP server IP address where the firmware
image is stored.
3. Enter or edit the path and file name on the TFTP server for the
new firmware.
4. Click Download. When you download a new version, it is always
saved in the inactive location.
Activating New Firmware
To activate the new firmware, follow these instructions:
1. Click the Activate button.
The Activate Boot Location dialog box displays both firmware
locations and their respective build dates.
Figure 7-2 Activate Boot Location Dialog Box
2. Click the version you want to activate.
3. Click OK.
4. Choose Reset System from the File menu to make the version
active. Now the newest version becomes active and the prior
version is saved as inactive.