System information
Table Of Contents
- Cover
- Preface
- Overview
- Configuring System Basics
- Configuring RADs and mSAN Connections
- Configuring iSAN Connections
- Configuring iSCSI Connections
- Monitoring SAN Router Operation and Connections
- Configuration, Firmware, and System Log Maintenance
- Troubleshooting
- Glossary
- Index
7
7-2
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Upgrading Firmware (E/OSi)
Upgrading Firmware (E/OSi)
Use the following steps to upgrade firmware on the SAN Router.
Note that you may also need to upgrade the bootrom file if you have
any other version installed. To determine if you need to upgrade
bootrom and for instructions refer to
Upgrading bootrom (E/OSi) on
page 7-5.
Downloading Firmware
You can use the CLI or Element Manager to download and install a
new version of the firmware for the SAN Router.
The SAN Router can store up to two versions of firmware – the
currently active version and an inactive version. To download
firmware, follow these instructions:
1. Select File>Firmware Upgrade. The Firmware Upgrade dialog box
appears.
Figure 7-1 Firmware Upgrade Dialog Box