System information

6
Monitoring SAN Router Operation and Connections
6-21
Viewing Statistics
Port Traffic Statistics
To display the port traffic statistics, follow these instructions.
1. Select Statistics/Info>Port Traffic to display the Port Traffic Report
dialog box (
Figure 6-17 on page 6-22).
Device ID The loop ID of the attached device. This is the third byte of the
three-byte Fibre Channel ID.
Status For an arbitrated loop; it tells whether the device is Enabled or
Bypassed.
Device Symbolic Name The Port Symbolic Name of the device.
Capacity Storage device capacity in megabytes.
Vendor ID The vendor name registered when the device logged into the
fabric.
Product ID The vendor product ID registered when the device logged into
the fabric.
Device Type The SCSI type of device. “Direct-access device” usually
means a disk. “Sequential-access device” usually indicates a
tape.
Port WWN The FC port World Wide Name for the attached device.
Node WWN The FC node World Wide Name for the attached device.
Table 6-8 Fibre Channel Device Properties Report (Continued)
Item
Meaning