System information

6
Monitoring SAN Router Operation and Connections
6-15
Viewing Statistics
Figure 6-14 GE Port Statistics Dialog Box
Status information in the GE Port Statistics dialog box is described in
Table 6-6.
NOTE: Port statistic counters, such as RX octets, TX octets, and errors, can be
reset (via the Reset button) to a baseline count of zero and have the difference
displayed between this new baseline and subsequent polls. Resetting the
counters does not flush the counters in the SAN Router, rather it only
re-adjusts the displayed values in this instance of Element Manager.
Table 6-6 Gigabit Ethernet/Port Statistics
Item Meaning
Port type Current port type or the port type which will be used after next SAN
Router reset if this variable is set in NVRAM.
Por t Name User-defined name for this port.
Port operational
state
Operation status of this port (Up, Down, No signal detected, Needs
Reboot, or In Transition).
Interface type Interface type. The only Interface type currently supported is
ethernet-csmacd.