System information
Table Of Contents
- Cover
- Preface
- Overview
- Configuring System Basics
- Configuring RADs and mSAN Connections
- Configuring iSAN Connections
- Configuring iSCSI Connections
- Monitoring SAN Router Operation and Connections
- Configuration, Firmware, and System Log Maintenance
- Troubleshooting
- Glossary
- Index
5
Configuring iSCSI Connections
5-39
Configuring iSCSI Authentication
Figure 5-25 Add Static Route Dialog Box
Configuration 5 - Unsupported Case, RADIUS Server Located on Alternate TCP Port
In this configuration, the RADIUS server is on a subnet that is
reachable only via a different iSCSI-capable port (refer to
Figure 5-26
on page 5-40). This configuration is not supported. However, if there
is an external route between the two ports provided by an external IP
Router, the RADIUS server can be on a subnet that one of the other
iSCSI-capable ports are on.