System information

5
5-38
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Configuring iSCSI Authentication
Figure 5-24 RADIUS Server Configuration Dialog Box
If the RADIUS Server resides on a subnet that cannot be directly
accessed from the SAN Router, establish a static route path between
the server and the SAN Router. The Static Route Table (
Table 5-1)
shows all necessary static routes in this example.
Figure 5-25 on page 5-39 illustrates the Add Static Route dialog box in
the Element Manager where you add static routes. Display the Add
Static Route dialog box by selecting the Add button on the Static
Routing Configuration dialog box. Display the Static Routing
Configuration dialog box by selecting the Static Routing option from
the Configuration menu.
Table 5-1 Static Route
Static Route Source Destination Address Mask Gateway Address
RADIUS Server 10.10.10.11 255.255.255.255 172.168.15.1
Redundant RADIUS
Server
10.10.10.11 255.255.255.255 172.168.15.1
Router 10.10.10.0 255.0.0.0 172.168.10.25
SAN Router 172.168.15.0 255.255.255.0 172.168.10.1