System information
Table Of Contents
- Cover
- Preface
- Overview
- Configuring System Basics
- Configuring RADs and mSAN Connections
- Configuring iSAN Connections
- Configuring iSCSI Connections
- Monitoring SAN Router Operation and Connections
- Configuration, Firmware, and System Log Maintenance
- Troubleshooting
- Glossary
- Index
5
5-34
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Configuring iSCSI Authentication
Figure 5-20 shows an example of the associated RADIUS Server
Configuration dialog box in the Element Manager. Display this dialog
box by selecting RADIUS Server Configuration under the Configuration
menu, iSCSI submenu.
Figure 5-20 RADIUS Server Configuration Dialog Box
Configuration 3 - RADIUS Server Located on the Same Subnet as the Management Port
In this configuration, the RADIUS server is on the same subnet as the
SAN Router's 10/100 management port (refer to
Figure 5-21 on
page 5-35). The RADIUS client on the SAN Router will communicate
with the RADIUS server via the 10/100 management port on the
SAN Router.