System information

Table Of Contents
5
Configuring iSCSI Connections
5-21
Zoning iSCSI Devices
Setting Up a LUN Map and Mask
1. In the mSAN Configuration window, click New Zone to display the
New Zone dialog box.
2. In the New Zone dialog box, type a zone name.
3. Select the newly-created zone and the FC Target with multiple
LUNs that you want the iSCSI Initiator to access, and click Add.
The zone configuration at this point is shown in the
Figure 5-9.
Figure 5-9 mSAN Configuration Window
4. Right-click the FC target in the Router Zones section and launch
the LUN Mapping/Masking dialog box (
Figure 5-10 on page 5-22).
By default, all LUNs are selected (visible).
5. Select the LUNs that you want to provide access to the initiator.
Set a selected LUN to a VLUN value of zero. You can change the
VLUN value of other selected LUNs, but must ensure that one of
the selected LUNs have VLUN set to zero. Click OK.