System information
Table Of Contents
- Cover
- Preface
- Overview
- Configuring System Basics
- Configuring RADs and mSAN Connections
- Configuring iSAN Connections
- Configuring iSCSI Connections
- Monitoring SAN Router Operation and Connections
- Configuration, Firmware, and System Log Maintenance
- Troubleshooting
- Glossary
- Index
5
Configuring iSCSI Connections
5-19
Zoning iSCSI Devices
Zoning iSCSI Devices
Zoning is the process of controlling which targets are accessible to the
initiator. Targets could have one or multiple LUNs. SAN Routers
support LUN mapping/masking capabilities within the SAN Router
for iSCSI initiators. If you want to leverage the LUN
Mapping/Masking feature, use the following procedure.
Zoning without LUN Mapping/Masking
1. Start SANvergence Manager
2. Select the proper mSAN from the list of mSANs in the mSAN
pane.
3. Select mSAN Configuration to display the mSAN Configuration
window.
Figure 5-8 Zoning Configuration Window
4. Click New Zone to display the New Zone dialog box.
5. In the New Zone dialog box, type a zone name (WebServerZone).