System information

5
Configuring iSCSI Connections
5-15
Configuring iSCSI Devices
4. On the iSCSI Initiator, start the iSCSI login process. Some
initiators may provide a button to initiate a login; others may
require a reboot of the initiator. Messages should appear in the
Element Manager Message Log, indicating that the initiator has
registered with the name server on the SAN Router.
The string appearing after InitiatorName: and between the
brackets ('[', ']') is the InitiatorName that the iSCSI initiator is
attempting to login with.
5. Select this string and press ^c to copy it to the clipboard. Refer to
the section titled
Granting Clipboard Access for Copy and Paste on
page 2-12 to allow copy and paste from a Java applet.
6. Select Configuration>iSCSI>Devices. The iSCSI Devices dialog box
appears (
Figure 5-7 on page 5-15).
NOTE: This dialog box appears only if the software package supports
iSCSI.
Figure 5-7 iSCSI Devices Dialog Box
7. To add a new iSCSI device, click the Add button. This adds a
blank row to the table of devices, where you may enter the new
device information.