System information
Table Of Contents
- Cover
- Preface
- Overview
- Configuring System Basics
- Configuring RADs and mSAN Connections
- Configuring iSAN Connections
- Configuring iSCSI Connections
- Monitoring SAN Router Operation and Connections
- Configuration, Firmware, and System Log Maintenance
- Troubleshooting
- Glossary
- Index
5
Configuring iSCSI Connections
5-5
Configuring iSCSI Ports
Figure 5-3 FC/Ethernet Port Configuration Dialog Box
2. Select a port. The screen is refreshed to show the operational
state.
3. Type a label for this port in the Port Name field.
4. Set the port speed under the Port Speed list, if needed. Select the
Enable Port checkbox.
5. Select or clear the Autonegotiations check box as required. This
option determines whether the port advertises its autonegotiation
properties to a receiving device per the autonegotiation specified
by IEEE standard 802.3.