System information
Table Of Contents
- Cover
- Preface
- Overview
- Configuring System Basics
- Configuring RADs and mSAN Connections
- Configuring iSAN Connections
- Configuring iSCSI Connections
- Monitoring SAN Router Operation and Connections
- Configuration, Firmware, and System Log Maintenance
- Troubleshooting
- Glossary
- Index
4
Configuring iSAN Connections
4-27
Example Configurations and Procedures
When you change the Inband IP address, you must reset the SAN
Router before you can configure the iFCP port.
12. Select Configuration>Ports>FC/Ethernet when Element Manager
displays the FC/Ethernet Port Configuration dialog box (
Figure 4-12
on page 4-27).
Figure 4-12 FC/Ethernet Port Configuration Dialog Box
• Select port 13 for configuring a remote SAN /iFCP connection.
•Select Enable Port.