Service manual

A-2
McDATA Eclipse 2640 SAN Router Installation and Service Manual
• Width: 16.90 in (429.3 mm)
• Depth: 25.425 in (645.8 mm)
• Weight: 25 lbs (11.4 kg)
Power Requirements
• U.S./Japan: Nominal 100/120 volts, 50 to 60 Hz
• Europe/Australia: Nominal 220/240 volts, 50 to 60 Hz
Power Consumption
• Dual redundant power supplies, each with a maximum power
consumption of 250 Watts.
• Power consumption: 190 Watts.
Environmental Requirements
• Temperature: 41° to 104° F (5° to 40° C)
• Humidity: 20% to 85% non-condensing
• Heat output: 650 BTU/hr
Compatible Transceivers
The following information regarding compatible transceiver modules
applies to the SAN Router except where specified.
1G FC Multi-Mode,
LC Connectors
• Agilent Technologies - HFBR-5701L - 1G Fibre Channel
100-M5-SN-1/100-M6-SN-1 (Multi-Mode, LC Connector)
Tran sc eiver s
• Agilent Technologies - HFBR-5701LP - 1G Fibre Channel
100-M5-SN-1/100-M6-SN-1 (Multi-Mode, LC Connector)
Tran sc eiver s
• JDS Uniphase - JSP-21S0AA1 -1G Fibre Channel
100-M5-SN-1/100-M6-SN-1 (Multi-Mode, LC Connector)
Tran sc eiver s