Service manual

3-4
McDATA Eclipse 2640 SAN Router Installation and Service Manual
4. Click the Download button. When you download a new version,
it is always saved in the inactive location.
Figure 3-1 Firmware Upgrade Dialog Box
Activate New
Firmware
To activate the new firmware:
1. Click the Activate button.
•The Activate Boot Location dialog displays both firmware
locations and their respective build dates.
2. Click on the version you want to activate.
3. Click OK.
4. Choose Reset System from the File menu to make the new
version active. When the reset is finished, the newest version
becomes active and the prior version is saved as inactive.
• During the reset the Save Configuration to Flash dialog box
displays.
5. Click Save and Reset.