Service manual

Installing and Connecting the 2640 SAN Router
2-21
iSCSI/iFCP port 3 Internal SAN
address
0.0.0.0 Configuration>Port>FC/Ethernet
iSCSI/iFCP port 4 IP address 0.0.0.0 Configuration>Port>FC/Ethernet
iSCSI/iFCP port 4 subnet mask 0.0.0.0 Configuration>Port>FC/Ethernet
iSCSI/iFCP port 4 External router
address
0.0.0.0 Configuration>Port>FC/Ethernet
iSCSI/iFCP port 4 Internal SAN
address
0.0.0.0 Configuration>Port>FC/Ethernet
TCP parameters
Auto Reset Port on Severe Errors Enabled Configuration>Port>FC/Ethernet>
Advanced
MTU Size Auto Configuration>Port>FC/Ethernet>
Advanced
iSCSI parameters
Selective ACKnowledgement Disabled Configuration>Port>FC/Ethernet>
Advanced
Large PDU Enabled Configuration>Port>FC/Ethernet>
Advanced
Initial R2T Enabled Configuration>Port>FC/Ethernet>
Advanced
Store and Forward Disabled Configuration>Port>FC/Ethernet>
Advanced
Target Read Pad ding Disabled Configuration>Port>FC/Ethernet>
Advanced
Target Write Padding Disabled Configuration>Port>FC/Ethernet>
Advanced
Immediate Data Enabled Configuration>Port>FC/Ethernet>
Advanced
NOP Packets Enabled
Table 2-9 SAN Router Firmware Default Values via Element Manager (Continued)
Element Manager Parameters Default Setting Element Manager Menu Hierarchy