Service manual

xxiv
McDATA Eclipse 2640 SAN Router Installation and Service Manual
Preface
Safety Notices and Labels
When using this product, observe the danger, caution, and attention
notices provided in this manual. The notices are accompanied by
symbols that represent the severity of the safety condition. The
danger and caution notices are listed in numerical order based on
their IDs, which are displayed in parentheses, for example (D004), at
the end of each notice. Use this ID to locate the translations of these
danger and caution notices in the
McDATA Product Safety Notices
(620-000247)
publication, which is included with this product.
The following notices and statements are used in this manual. They
are listed below in order of increasing severity of potential hazards.
• Note: These notices provide tips, guidance, or advice.
• Attention notices: These notices indicate potential damage to
programs, hardware, or data.
• Caution notices: These statements indicate situations that can be
potentially hazardous to you.
• Danger notices: These statements indicate conditions or
situations or conditions that can be potentially lethal or extremely
hazardous to you. Safety labels are also attached directly to
products to warn of these conditions or situations.
ATTENTION! Read and comply with the safety notices before installing or
servicing the SAN Router. Translated safety notices are provided in the
McDATA Product Safety Notices (620-000247) publication which is included
with this product.
Danger Notice
The following DANGER notice appears in this publication and
describes safety practices that must be observed while installing or
servicing a director or switch. A DANGER notice provides essential
information or instructions for which disregard or noncompliance
may result in death or severe personal injury.
ATTENTION! Translated safety notices are provided in the McDATA
Product Safety Notices (620-000247) publication which is included with this
product.