Service manual

2
2-56
Intrepid® 6140 Director Installation and Service Manual
Installation Tasks
Configure Director Identification
Perform this procedure to configure the director identification. The
Name, Location,andContact variables correspond respectively to the
SNMP variablessysName,sysLocation,andsysContact,andareusedby
management workstations when obtaining director data.
1. Select Identification from the Configure menu at any view. The
Configure Identification dialog box displays (Figure 2-27).
a. Type a unique director name of 24 alphanumeric characters or
less in the Name field. If the director is installed on a public
LAN,thenameshouldreflecttheEthernetnetworkDNShost
name.
b. Type a director nickname name of 24 alphanumeric characters
or less in the Nickname field.Thenicknameappearsinsteadof
the WWN in Element Manager application views.
c. Type a description of 255 alphanumeric characters or less in
the Description field.
d. Type the physical location or 255 alphanumeric characters or
less in the Location field.
e. Typethenameofacontactperson(255alphanumeric
characters or less) in the Contact field.
2. Click Activate to save the information and close the dialog box.
Figure 2-27 Configure Identification Dialog Box
Configure Director Parameters
Perform this procedure to configure director operating parameters.
1. Set the director offline (SettingtheDirectorOnlineorOfflineon
page 4-36).