Service manual

2
Installation Tasks
2-55
Installation Tasks
•Second(SS): 0 through 59.
d. Click Activate to set the director date and time and close the
dialog box.
3. To set the director to periodically synchronize date and time with
the SAN management application:
a. Click the Periodic Date/Time Synchronization check box to select
theoption(checkmarkinthebox).Date and Time fields are
greyed out and not selectable. Perform one of the following:
• Click Activateto enable synchronization and close the
dialog box. Director date and time synchronize with the
SAN management application date and time at the next
update period (at least once daily).
• Click Sync Now to synchronize the director and SAN
management application immediately. The Date and Time
Synced information dialog box displays. Click OK to
synchronize the date and time and close the dialog box,
then click Activate to enable synchronization and close the
ConfigureDateandTimedialog box.
Task 19: Configure the Element Manager Application
To configure the Element Manager application, selectively perform
the following tasks according to customer requirements:
• Product - includes identification, product parameters, and fabric
parameters.
• Ports - includes basic information, buffer-to-buffer credits
(BB_Credits), and N_Port identifier virtualization (NPIV).
• Management- includes SNMP trap messagerecipients;threshold
alerts; EFCM Basic Edition interface access; Telnet access; and
e-mail, Ethernet event, and call-home event notification.
• Security - includes SANtegrity authentication, Enterprise Fabric
Mode, and SANtegrity binding.
• Interswitch links - includes OpenTrunking, preferred path, and
ISL port fencing.