Service manual

2
2-52
Intrepid® 6140 Director Installation and Service Manual
Installation Tasks
During the grace period, a No Feature Key dialog box appears
when the Element Manager application opens. Click OK to close
the dialog box and use the application. In addition, the message
Element Manager license key has not been installed - Please
follow up instructions to update permanent key appears
splashed across all views.
• Full volatility - This feature ensures no Fibre Channel frames are
stored after the product is powered off or fails, and a memory
dump file (that possibly includes classified data frames) is not
included as part of the data collection procedure.
• N_Port ID virtualization - This feature allows up to 256 Fibre
Channel addresses to be assigned to an N_Port.
• OpenTrunking - Thisfeature provides dynamic loadbalancing of
Fibre Channel traffic across multiple ISLs.
• SANtegrity authentication - This feature enhances security in
SANs byrestricting accessto FibreChannelelements (directors or
fabric switches).
• SANtegrity binding - This feature enhances security in SANs
with a large and mixed group of fabrics and attached devices.
After purchasing a feature, obtain the PFE key by following the
enclosed instructions. Thekeyis analphanumeric stringconsisting of
uppercaseandlowercasecharactersthatmustbeenteredexactly,
including dashes. An example format is:
XxXx-XXxX-xxXX-xX.
Keys areencoded to workonly with theserial number ofthe installed
product. Record the key to re-install the feature if required. If the
product fails and is replaced, obtain new PFE keys from the solution
center (800-752-4572 or [e-mail]). Have the serial
numbersofthefailedandreplacementproducts,andtheoldPFEkey
number or transaction code. After obtaining a PFE key, install the
feature as follows:
1. Select Features from theConfiguremenu at any view. TheConfigure
Feature Key dialog box displays.
2. Click New.TheNew Feature Key dialog box displays (Figure 2-25).