Service manual

2
2-44
Intrepid® 6140 Director Installation and Service Manual
Installation Tasks
5. Ifnootheruserswillbechanged,closealldialogboxesandreturn
to the Windows desktop.
Figure 2-20 Properties Dialog Box (General Tab)
Task 10: Set Management Server Date and Time
SAN Management application logs are stamped with the server date
and time, and the director system clock is synchronized with the
server date and time by default. To set the server date and time:
1. At the Windows desktop, click Start attheleftsideofthetaskbar
(bottom of the desktop), then sequentially select Settings, Control
Panel,andDate/Time.TheDate/Time Properties dialog box displays
with the Date & Time page open.
NOTE: The Time Zone field must be set before the Date & Time field.
2. Click the Time Zone tab. The Date/Time Properties dialog box
displays with the Time Zone page open (Figure 2-21).